幸运农场

Product

  • ANSI ASME B16.36 Threaded Pipe Flanges

    ANSI ASME B16.36 Threaded Pipe Flanges

    Threaded flange, refers to the product of the wire buckle, generally used for welding pipe connection flange connecting end face with threaded flange.

    Read More
  • ANSI ASME B16.36 Blind Flanges

    ANSI ASME B16.36 Blind Flanges

    The formal name for a blind disk is called a flange cover, and some are also called a blind flange or pipe plug.It is a flange with no hole in the middle, used to block the pipe opening.The function is the same as that of the head and cap, except that the blind seal is a removable sealing device...

    Read More
  • ANSI ASME B16.47 Socket Welding Flanges

    ANSI ASME B16.47 Socket Welding Flanges

    幸运农场Socket welding flanges refer to the flanges that are inserted into the step of the flange ring at the end of the pipe and welded on the outside.There are two types with and without a neck.The flange with neck pipe has good rigidity, small welding deformation and good sealing property. It can be...

    Read More
  • JIS Forged Welding Neck Flanges

    JIS Forged Welding Neck Flanges

    幸运农场Mainly is the neck higher rigidity to the flange, the bearing capacity has been improved.Its purpose is to transfer the pressure of the pipeline, so as to reduce the high stress concentration in the French base butt welding flange, also known as the high neck flange, rigid, suitable for higher...

    Read More
  • ANSI ASME B16.5 Forged Threaded Flanges

    ANSI ASME B16.5 Forged Threaded Flanges

    幸运农场Threaded flange is suitable for pipe line with great pressure or temperature fluctuation or pipe line with high temperature, high pressure and low temperature to carry out bolt hole and waterline machining.

    Read More
  • DIN Forged Pipe Flanges

    DIN Forged Pipe Flanges

    幸运农场Forging flange is a kind of product with better mechanical properties in flange products. Its raw materials are generally blank tubes, and then after cutting, it is continuously pounded to eliminate segregation, porosity and other defects in the ingot.Socket welding flange suitable for small...

    Read More
  • ANSI ASME B16.36 welding neck pipe flanges

    ANSI ASME B16.36 welding neck pipe flanges

    Neck flange of British elevation Kg pressure is divided into: PN6, PN10, PN16, PN25, PN40, PN64, PN100 Flange size is divided into: DN15-- DN2000 Flange material is divided into: CS RST37.2, S235JR, C22.8, SS304, SS304L SS316 SS316L

    Read More
  • JIS Threaded Pipe Flanges

    JIS Threaded Pipe Flanges

    幸运农场Threaded fittings are threaded fittings.It is commonly used in water gas pipe, small diameter pipe, compressed air pipe and low pressure steam pipe.A pipe line connected with a threaded pipe end.Thread can be coated with appropriate cement (such as thick white paint, lead oxide glycerin cement,...

    Read More
  • KS Carbon Steel Pipe Flanges

    KS Carbon Steel Pipe Flanges

    幸运农场Carbon steel pipe fittings is one of the most widely used pipe fittings at present.The main material is Q235,20#,35#,45#, 16Mn.The main products include carbon steel elbow, carbon steel flange, carbon steel tee, carbon steel four, carbon steel reducing pipe (size head), carbon steel cap, etc.The...

    Read More
  • GOST Carbon Steel Pipe Flanges

    GOST Carbon Steel Pipe Flanges

    Carbon steel pipe fittings mainly refer to the steel whose mechanical properties depend on the carbon content in the steel, but generally do not add a lot of alloy elements, sometimes also known as plain carbon steel or carbon steel.

    Read More
  • BS Carbon Steel Pipe Flanges

    BS Carbon Steel Pipe Flanges

    幸运农场All carbon steel flanges shall be surface-treated, the inner and outer surface of the oxidized iron sheet is shot peen off, and then coated with anti-corrosion paint.This is both for export purposes and for domestic purposes as well as to facilitate transportation and prevent corrosion and...

    Read More
  • JIS Carbon Steel Pipe Flanges

    JIS Carbon Steel Pipe Flanges

    Carbon steel flange storage is very important, the general project will choose carbon steel material, carbon steel flange surface is easy to appear floating rust, placed for a long time, the appearance is not beautiful, the storage of flange should not be directly put on the ground, put some...

    Read More